DYN-O-MATE TOOLS AND ACCESSORIES

 

Dyna-Hammer for Pittsburgh Lock

The Dyna-Hammer puts an end to manual hammering. Just a couple of taps at the center and ends of standard length duct to secure, then the Dyna-Hammer does all of the work. Radius fittings and straight line duct get powerfully knocked down at approximately 20 feet per minute on 14 to 30 gauge metal. Features an ergonomic, multi-stage trigger throttle, for better control during use. Included multi-directional air hose swivel prevents hose restriction during operation. Manufactured of 100% high grade tool steel for durability and trouble-free years of use.

Dyna-Hammer
Dyna-Hammer Literature Sheet (DDC)

Pink Butyl Gasket

This new Pink Butyl Gasket from Duro Dyne has a special ‘H’ shaped pattern to provide 4 points of contact to the metal for a secured air tight seal. It also has a lower compression resistance; excellent resistance to water, alcohols, mild acids and mild bases; is non-corrosive; considered a non-irritant for “appraisal of the safety of chemicals in food, drugs and cosmetics” and can be applied for LEED credit. The pink color is highly visible for easy inspection on the job site while of course furthering the awareness of the need to join the fight against breast cancer.

The mission of the Breast Cancer Research Foundation (BCRF) is to prevent and cure breast cancer by advancing the world’s most promising research. To help further the cause of the BCRF, Duro Dyne decided to partner with them and hold a machinery auction in 2017 which resulted in $65,885 being raised for Breast Cancer Research.

Duro Dyne is continuing its fundraising partnership with the Breast Cancer Research Foundation by contributing $2 to the BCRF for every box (500ft) of Pink Butyl Gasket sold.

Pink Butyl Gasket

Pink Butyl Gasket Literature Sheet

Pink Butyl Gasket Submittal

9″ Magnetic Drift Pin Ratchet Tool

(Patent No. 6,901,823)

The 9” Magnetic Drift Pin Ratchet Tool is ideal for duct installation. The 9’’ long drift
pin end allows you to align two corners in a flange connection with ease. The 9/16’’
reversible ratchet allows for easy tightening and loosening of standard 3/8” nuts &
bolts commonly used in flange connections. A heavy duty magnet inside the tool
securely attaches it to ductwork while not in use so it’s conveniently located where
you need it at all times.

Ratchet Tool Diagram

9″ Magnetic Drift Pin Ratchet Tool Literature Sheet

The 9″ Magnetic Drift Pin Ratchel Tool in use

Pittsburgh Lock Opening Tool

The Pittsburgh Lock Opening Tool is used to open a longitudinal seam that is used in the fabrication of sheet metal ductwork.

Pittsburgh Lock Opening Tool

Pittsburgh Lock Opening Tool Literature Sheet

Beam Clamps

The Beam Clamp is a structual attachment to the top or bottom of metal I-beams, purlins, channel, or angle iron. It comes in a large or small mouth and an Electro-Galvanized or plain finish. It is available for 3/8’’ and 1/2’’ threaded rod.

Beam Clamps

Beam Clamp Literature Sheet

Beam Clamp Submittal

Small Mouth and C-Clamp Literature Sheet

Small Mouth and C-Clamp Submittal

Punched Angle Iron

The Punched Angle Iron is a great multipurpose product for use in reinforcing duct or as a mounting angle.
• Available in 12’ lengths
• Rollformed metal construction
• Available in Aluminum and Stainless Steel
• 16-gauge Galvanized Steel
• 3/16” holes on 3” centers

Punched Angle Iron

Punched Angle Iron Literature Sheet

Punched Angle Iron Submittal

Crimper Tool

The Dyn-O-Mate Crimper Tool installs the TDC or TDF corner and crimps the edge over to hold the corner in place.

Crimper Tool Literature Sheet

Crimper Tool Instructions

Cleat Tool – Deluxe

Install the finishing cleat quickly and easily. The Cleat Tool Deluxe pulls the ductwork tight while installing the cleat and creating a quick, easy and clean seal on duct connections over 48”.

Cleat Tool - Deluxe

Universal Magnetic Cleat Tool

Install the finishing cleat quickly and easily with the Universal Magnetic Cleat Tool. The tool pulls the ductwork tight while installing the cleat and creating a quick, easy and clean seal on all size duct connections.

  • 2 magnets on tool
  • Installs all style Duro Dyne cleats
  • High Visibility Yellow to easily find the tool you need
  • End of the tool handle aids in removal of cleat from duct
  • New lightweight design

Universal Magnetic Cleat Tool

Universal Magnetic Cleat Tool Literature Sheet

The Universal Magnetic Cleat Tool in use

Vane Dimpler

The Duro Dyne Vane Dimpler hand tool is a fast easy way to secure vanes to rail.

  • Replaces tack welding, chiseling, or other awkward and time consuming methods.
  • The Vane Dimpler can be used on the vane before or after placement on the rail. Either way, its locked tight!
  • No other tools or welding equipment necessary.

Vane Dimpler   Vane Dimpler in use

Vane Dimpler Literature Sheet

Butyl Gasketing

BTL500 Butyl and BN516-34 Neoprene Gaskets offer an easy-to-use sealant to provide a moisture and vapor-tight seal to prohibit water and dust from any connection at any atmospheric pressure.

Butyl gasket is used in tape and bead form to seal transverse duct connections systems helping to provide a moisture and air tight seal. This tighter seal also helps reduce energy waste and noise.

  • Duro Dyne Butyl gasket can withstand movement without cracking.
  • Adheres to most dry, clean surfaces such as steel, aluminum, plastics, wood and concrete.
  • Excellent resistance to water, alcohols, mild acids and mild bases.
  • Non-Corrosive
  • All Duro Dyne Butyl Gasketing is considered a non-irritant for “appraisal of the safety of chemicals in food, drugs and cosmetics”
  • BTL500 is UL listed and can be applied to LEED credit

BTL Butyl Gasketing Roll

BTL316 Butyl Gasketing Submittal

BTL500 Butyl Gasketing Submittal

Reddi-Stik Neoprene and Urethane Gasketing

NEOPRENE (GN)

Medium-soft closed cell neoprene (ASTM-SC-41) with non-connecting cells for outstanding insulating qualities, backed with a powerful, dependable adhesive. Protected by an easy-release (treated) backing paper.

URETHANE (GU)

Foamed polyurethane (Polyester type) with Mylar backing. A high-tack, pressure-sensitive adhesive is applied to one face and is protected by easily removed, silicone-treated backing paper.

Click here for more information about Duro Dyne Reddi-Stik Gasketing.

Duro-Gum™

Duro-Gum™ is a convenient way to seal a joint, crack or any opening so that no moisture, dust particles or air can enter the crevice. It is a gray, permanently soft, nontoxic compound which will adhere to clean, dry surfaces including metal, plastic, wood and glass. It will not adversely affect other plastic materials or corrode metals. It also has no adverse effect to human skin.

Duro Gum

Duro-Gum Literature Sheet

Duro-Gum Submittal

See also DYN-O-LOC and Accessories