DYNA-TITE TOOLS AND ACCESSORIES
Rapit® Drop-In Deck Hanger
The Rapit® Drop-In Deck Hanger is designed for installation in concrete-filled metal deck assemblies. RDI Deck Hangers are installed before pouring the concrete, to reduce installation costs and increase strength values. Once installed, the insert hangs below the deck surface for easy installation of threaded rod or Dyna-Studs. Can be used to hang HVAC ductwork, pipe, strut, conduit, lighting, signage, sprinkler systems and more. The applications are endless!
- 3/8” diameter UNC female threads
- Fast & easy to install
- Low profile for less trip hazard on jobsite
- Can be used through or between ribs on metal decking
- Internal threads eliminate the need for couplings
- Built-in screw holes for multi-position solid deck mounting
- 10×3/4 High Head Pro Point screws included for convenient installation
- Yellow powder coating for durability, safety & easy identification
- Designed to be used with BIM location systems
| Item No. | Code | Description | Qty per Pkg |
| 30339 | RDI38 | 3/8in Rapit® Drop-In Deck Hanger | 50 |
Rapit Drop-In Deck Hanger Literature Sheet
Rapit Drop-In Deck Hanger Hanger Submittal
Rapit Drop-In Deck Hanger Instructions
Cable Cutter
When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.
- Safety catch
- Hand held cutting tool for WC2-CL6, WC3-CL12, WC4-CL18 and WC6-CL23 wire rope
- Spring loaded for ease of use
- 5” Long handles for high leverage
- Hardened steel blades for durability
- Vinyl coated handles for comfortable, non-slip grip
| Item No. | Code | Description | Qty per Pkg |
| 818263 | DTWRCL | Cable Cutter for WC2,WC3,WC4 & WC6 Wire Rope | 1 |
WC8-CL25 Cable Cutter
When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.
- Safety catch
- WC8-CL25 wire rope cutting capacity
- Hardened steel blades for durability
- Vinyl coated handles for comfortable, non-slip grip
| Item No. | Code | Description | Qty per Pkg |
| 30344 | DTRWC14 | Cable Cutter for WC8-CL25 Wire Rope | 1 |
Custom Cable Counter
The CCC1 makes preparing for your duct hanging project a lot simpler. Take an empty five gallon bucket, put a spool of wire rope in the bottom, put in some boxes of Dyna-Tite cable locks and a cable cutter. Place the CCC1 on top of the bucket and you are ready for the job site. At the job site remove the cable lock boxes and the wire cutter, thread the wire rope through the CCC1 measuring device and you are ready to hang ductwork. Just pull the wire rope to the length needed, cut it and reset the counter.
- Counter displays from 0 feet 0 inches to 9999 feet and 11 inches
- Push button reset
- Designed for use with Duro Dyne wire rope
- Fits most 5 gallon buckets
- Lightweight
| Item No. | Code | Description | Qty per Pkg |
| 30390 | CCC1 | Custom Cable Counter | 1 |
Spiral Buckle
This Heavy Galvanized Steel buckle is designed to suspend round and oval ductwork from ceiling joists or beams with the use of threaded rod up to 3/8” in diameter. Simply place 1” hanging strap in one side of the buckle then around the material and into the other side of the buckle. When the strap is correctly inserted through the slots, the strap is locked into the buckle by the weight of the duct.
with Eye Bolt with Threaded Rod
| Item No. | Code | Description | Qty per Pkg |
| 30340 | DSB1 | Dyna-Tite Spiral Buckle | 50 |
Spiral Buckle Literature Sheet
Spiral Buckle Submittal
Eye Bolt and Nut
- Eye Bolt & Nut (3/8″ – 16 x 2-1/2″)
- Weight limit of 400 lbs.
| Item No. | Code | Description | Qty per Pkg |
| 30220 | DDG3W | Dyna-Tite Eye Bolt and Nut | 100 |