DYNA-TITE CABLES

CABLE

Wire Rope

Aviation grade galvanized wire rope supplied by Duro Dyne is manufactured to exacting standards and statistically tested to verify stated breaking strengths. Duro Dyne WC2-CL6, WC3-CL12 and WC4-CL18 wire ropes utilize standard 7×7 construction. Duro Dyne WC8-CL25 and WC6-CL23 wire ropes have a 7×19 construction. Only use wire rope supplied by Duro Dyne with Dyna-Tite cable locks to ensure maximum safety and integrity of the installation.

Duro Dyne Dyna-Tite Wire Rope          Cable Roll and 7x7 7x19 Construction

Size Tolerance Construction For Use With Safe Working Load *+
WC8-CL25 +5% /-0% 7×19 CL25-WC8 50-1,100 lbs (25-500 Kg)
WC6-CL23 +.018/-.009 inch 7×19 CL23-WC6 50-640 lbs (25-291 Kg)
WC4-CL18 +.014 /-.007 inch 7×7 CL18-WC4 25-250 lbs (12-114 Kg)
WC3-CL12 +.012 /-.006 inch 7×7 CL12-WC3 25-150 lbs (12-68 Kg)
WC2-CL6 +.010 /-.005 inch 7×7 CL6-WC2 10-75 lbs (5-34 Kg)

* Safe Working Loads are based on a 5:1 Safety Factor
+ Hanging at angles will reduce the Safe Working Loads.
Please see our Effects of Hanging at Angles table here

Wire Rope Submittal Form

Looped Cable

The Looped Cable Assembly enhances the Dyna-Tite suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the jobsite. The remaining wire rope “drop” is passed through a channel in the Dyna-Tite Cable Lock. Then, the wire rope is either wrapped around the ductwork or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the ductwork in place. To ensure maximum safety, use only looped wire rope supplied by Duro Dyne with all cable lock applications.

Looped Cable Only

Item No. Code Description Loop Size Qty/Bx
30228 LC05WC3 5 ft WC3-CL12 Cable 1-1/2″ 100
30229 LC10WC3 10 ft WC3-CL12 Cable 1-1/2″ 100
30230 LC15WC3 15 ft WC3-CL12 Cable 1-1/2″ 100
30232 LC25WC3 25 ft WC3-CL12 Cable 1-1/2″ 50
30233 LC05WC4 5 ft WC4-CL18 Cable 3″ 100
30234 LC10WC4 10 ft WC4-CL18 Cable 3″ 100
30235 LC15WC4 15 ft WC4-CL18 Cable 3″ 100
30237 LC25WC4 25 ft WC4-CL18 Cable 3″ 50

End Fixings Installation Instructions

Hanging at angles will reduce the Safe Working Loads.
Please see our Effects of Hanging at Angles table here

Eyelets

Duro Dyne Dyna-Tite eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. Dyna-Tite Eyelet assemblies are available for installation with either a 1/4 in. or 3/8 in. fastener. They are available in 45°and 90° variations.

Dyna-Tite Eyelets

Eyelets Literature Sheet
End Fixings Installation Instructions
90° Eyelet Submittal
45° Eyelet Submittal

90° and 45° Eyelet with Cable Lock Kits

Duro Dyne Dyna-Tite eyelets are manufactured of zinc plated cold rolled steel and swaged to the wire rope cable with a hydraulic press. Dyna-Tite Eyelet assemblies are available for installation with either a 1/4 in. or 3/8 in. fastener. They are available in 45°and 90° variations.

The eyelet kits includes a 90° 1/4″ or 3/8″ or a 45° 1/4″ or 3/8″ eyelet with a cable lock that corresponds to the eyelet’s cable size. Available eyelet cable lengths: 5′, 10′, 15′ and 25′.

Eyelet with Cable lock Kits Literature Sheet DDC

Snap Hooks

Snap hook cables offer easy attachment points and are ideal for applications that require constant inspection or maintenance that may require you to remove the load from the ceiling.

Snap Hook

Snap Hook Literature Sheet
Snap Hook Submittal

Dyna-Stud® Swaged Threaded Stud

Dyna-Stud® used with Dyna-Tite cable locks can greatly decrease labor time for constructing suspension systems from a concrete or steel structure.

The Swaged Dyna-Stud is a heavy duty stud with one end of an aircraft rated cable attached. Dyna-Stud is used to suspend duct work from a concrete structure. The stud is threaded into the expansion anchor without putting stress on the cable. This makes for a much safer and tighter connection. The raw end of the cable, in conjunction with the cable lock, is used to attach the object being supported.

  • Available with:
    1/4 Threaded Bolt and WC3-CL12 Wire Rope
    3/8 Threaded Bolt and WC4-CL18 Wire Rope or
    3/8 Threaded Bolt and WC4-CL18 Wire Rope with Zip-Clip Lock
  • Available in 5, 10, 15 and 25 foot lengths
  • Drop-ins sold separately
  • Safe Working Loads are based on a 5:1 Safety Factor

Dyna-Stud Swaged

Dyna-Stud Swaged Literature Sheet
Dyna-Stud Swaged Submittal
Dyna-Stud Swaged with Zip-Clip Submittal
End Fixings Installation Instructions

Cable Cutter

When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.

  • Safety catch
  • Hand held cutting tool for WC2-CL6, WC3-CL12, WC4-CL18 and WC6-CL23 wire rope
  • Spring loaded for ease of use
  • 5” Long handles for high leverage
  • Hardened steel blades for durability
  • Vinyl coated handles for comfortable, non-slip grip

DTRWC14 Cable Cutter

Item No. Code Description Qty per Pkg
818263 DTWRCL Cable Cutter for WC2,WC3,WC4 & WC6 Wire Rope 1

WC8-CL25 Cable Cutter

When cutting wire cable it is important to use a recognized wire cable cutter such as the Duro Dyne cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Dyna-Tite.

  • Safety catch
  • WC8-CL25 wire rope cutting capacity
  • Hardened steel blades for durability
  • Vinyl coated handles for comfortable, non-slip grip

DTRWC Cable Cutter for WC8 Wire Rope

Item No. Code Description Qty per Pkg
30344 DTRWC14 Cable Cutter for WC8-CL25 Wire Rope 1

Custom Cable Counter

The CCC1 makes preparing for your duct hanging project a lot simpler. Take an empty five gallon bucket, put a spool of wire rope in the bottom, put in some boxes of Dyna-Tite cable locks and a cable cutter. Place the CCC1 on top of the bucket and you are ready for the job site. At the job site remove the cable lock boxes and the wire cutter, thread the wire rope through the CCC1 measuring device and you are ready to hang ductwork. Just pull the wire rope to the length needed, cut it and reset the counter.

  • Counter displays from 0 feet 0 inches to 9999 feet and 11 inches
  • Push button reset
  • Designed for use with Duro Dyne wire rope
  • Fits most 5 gallon buckets
  • Lightweight

CCC1 Cable Counter

Item No. Code Description Qty per Pkg
30390 CCC1 Custom Cable Counter 1