MF-12A Compact Pinspotter
Duro Dyne’s MF has been the standard for entry level “through insulation” welders for over 30 years. Proven performance and high reliability have made the MF a “Must Have” for any sheet metal shop which does occasional insulating.
Duro Dyne now introduces the MF-12A, building on that history and creating a new pinspotter with greater power and versatility. Special design welding transformers allow the MF12A to deliver more power, precisely timed to the welding tip. The MF-12A will weld pins from 1/2 inch to 4 inches long on steel from 26 to 20 gauge. Proven solid-state weld control circuitry guarantees years of reliable,
trouble-free service in your shop.
27110 MF-12A Compact Pinspotter
PBF-520 Heavy Duty Pinspotter
The PBF-520 welds BDEP, SSP, CP, FTC, PN or LN type fasteners to ductwork from 26 to 16 gauge. Will accommodate pins up to 4″. It requires 220 volt, 50 to 60 hz service fused for 100 amps. Place a pin on the TP-9 magnetic tip, insert the pin through the insulation, give the pin a 1/4 twist and depress the trigger switch. For LN type fasteners use a TPL2 tip. For PN type fasteners use a TP2 tip.
27377 PBF-520 Heavy Duty Pinspotter
CCD110N Compact Pinspotter
The CCD110N, Capacitor Discharge Welder, is designed for the convenience and comfort of the operator. It is powered by a 110 volt power source so it is ideal for smaller shops and light industrial applications. It will weld pins from 1/2″ to 4″ long onto steel from 26 to 20 gauge. The CCD110N is a smart choice for portable insulation applications. The CCD110 also features a weld capacity of up to 1/4″ steel and stainless steel for enhanced versatility.
27122 CCD110N Capacitor Discharge Pinspotter
FPP5 Pinspotter Platform
(For use with the MF12A/MF12 Compact Pinspotter)
The latest breakthrough from the innovators of insulation fastening is the FPP5, a pinspotter platform that enhances the capabilities of a compact pinspotter. The FPP5 works in conjunction with the Duro Dyne MF12A/MF12 compact pinspotter (sold separately) to allow it to be utilized as both a hand held pinspotter and a fixed head pinspotter. This provides the customer with greater capabilities at a lower cost. The FPP5 requires 110 volts and 80 PSI in addition to the power required by the MF12A (208-230 VAC single phase with 60 amp circuit protection). Please note the FPP5 will not work if not powered by an MF Pinspotter.
18016 FPP5 Platform Pinspotter
FG MACH III Automatic Bulk Feed Pinspotter
The FG Mach III Pinspotter was designed utilizing the best of current technologies to provide greater power and reliability for insulation fastening. The inherent minimal material handling and the use of welded pins will insure your shop a cost efficient, quality product. Our upgraded FG Mach III machine is capable of welding pins up to 4″ to address the higher R-value insulation now being specified throughout the industry.
18004 FG MACH III Automatic Bulk Feed Pinspotter
RH MACH IV Rolling Head Automatic Pinspotter
The RH MACH III welds BDEP, SSP, CP & FTC type fasteners to ductwork up to 18 gauge. It requires 220v, 50 to 60hz service, fused for 100 amps. A source of 85 psi air is required. Position a fastener over the insulation and depress the trigger switch. The machine inserts the fastener through the insulation and welds it to the steel.
18012 RH MACH IV Rolling Head Automatic Pinspotter
Optional Lift Kit For FG and RH Pinspotters
An optional machinery lift kit is also available for a custom ergonomic work space. Multi-Height Pinspotter Lift Kit will allow for height increase of 4″ or 6″.
17135 FG/RH Lift Kit
To view previous versions of Duro Dyne Pinspotters, please click here