WELDED INSULATION FASTENERS
CP Clip Pins (Rib Pins)
Duro Dyne Rib Pins (CP) have dished washers, ribbed nails for faster post-weld cooling and precision points to assure uniform quality. Available in 1/2″, 3/4″, 1″, 1-1/8″, 1-1/2″ and 2″ lengths. These are available in thousand pack (CPT) and bulk pack boxes (CPB).
Pin: .15″ Diameter 
Washer: Diameter 1.0″
Thickness: .015″ – .017″
CP Rib Pins are used with FG, RH, PBF, MF & CCD110 Pinspotters.
| Item Number | Code | Description | Pin Length Before Weld | Pin Length After Weld |
Quantity |
| 26023 | CPT-50 | 1/2″ Clip Pin | .49 | .365 | 1 M |
| 26024 | CPT-75 | 3/4″ Clip Pin | .656 | .531 | 1 M |
| 26025 | CPT-100 | 1″ Clip Pin | .906 | .781 | 1 M |
| 26032 | CPT-118 | 1-1/8″ Clip Pin | 1.125 | 1.000 | 1 M |
| 26026 | CPT-150 | 1-1/2″ Clip Pin | 1.490 | 1.365 | 1 M |
| 26027 | CPT-200 | 2″ Clip Pin | 1.906 | 1.781 | 1 M |
| 26028 | CPB-50 | 1/2″ Clip Pin | .49 | .365 | 5 M |
| 26029 | CPB-75 | 3/4″ Clip Pin | .656 | .531 | 5 M |
| 26030 | CPB-100 | 1″ Clip Pin | .906 | .781 | 5 M |
| 26035 | CPB-118 | 1-1/8″ Clip Pin | 1.125 | 1.000 | 3 M |
| 26031 | CPB-150 | 1-1/2″ Clip Pin | 1.490 | 1.365 | 3 M |
| 26038 | CPB-200 | 2″ Clip Pin | 1.906 | 1.781 | 3 M |
FTC Econo Point Pins
Econo Point FTC weld pins utilize a specially pointed nail to assure uniform welding. Available in 1/2″, 3/4″, 1″, 1-1/8″, 1-1/2″ and 2″ lengths. These are available in bulk boxes only.
Pin: .130″ Diameter 
Washer: Diameter 1.0″
Thickness: .015″ – .017″
FTC Econo Point Pins are used with FG, RH, PBF, MF & CCD110 Pinspotters.
| Item Number | Code | Description | Pin Length Before Weld | Pin Length After Weld |
Quantity |
| 26072 | FTC-12 | 1/2″ Econo Pin | .49 | .365 | 5 M |
| 26073 | FTC-34 | 3/4″ Econo Pin | .656 | .531 | 5 M |
| 26074 | FTC-100 | 1″ Econo Pin | .906 | .781 | 5 M |
| 26131 | FTC-118 | 1-1/8″ Econo Pin | 1.125 | 1.000 | 3 M |
| 26226 | FTC-150 | 1-1/2″ Econo Pin | 1.490 | 1.365 | 3 M |
| 26227 | FTC-200 | 2″ Econo Pin | 1.906 | 1.781 | 3 M |
SSP Gold Seal Pins
Gold Seal Pins hold the duct liner in place and seal the hole created during insertion. Heat activated gold adhesive on the underside of the washer secures the pin to the liner facing during the welding process.
• Adhesive coating insulates the underside of the washer to allow welding on foil faced insulation.
• Do not store at or above 110ºF or pins may stick together.
• Gold Seal Pins also feature “dished washers” and precision formed
points to insure consistent penetration of duct liner.
• Gold Seal Pins available in 1/2”, 3/4”, 1” and 2” lengths. Available in bulk boxes only.
• Gold Seal Pins also available in 3″ & 4″ in Thousand Pack container only.
Pin: .130″ Diameter 
Washer: Diameter 1.0″
Thickness: .015″ – .017″
Acrylic PSA
SSP Gold Seal Pins are used with FG, RH, PBF, MF & CCD110 Pinspotters.
| Item Number | Code | Description | Pin Length Before Weld | Pin Length After Weld |
Quantity |
| 26297 | SSPB12 | 1/2″ Gold Seal Pin | .49 | .365 | 5 M |
| 26294 | SSPB34 | 3/4″ Gold Seal Pin | .656 | .531 | 5 M |
| 26295 | SSPB100 | 1″ Gold Seal Pin | .906 | .781 | 5 M |
| 26296 | SSPB200 | 2″ Gold Seal Pin | 1.906 | 1.781 | 3 M |
| 26303 | SSP300 | 3″ Gold Seal Pin | 2.750 | 2.875 | 1 M |
| 26304 | SSP400 | 4″ Gold Seal Pin | 3.750 | 3.875 | 1 M |
BDEP Aerodynamic Washer Target Pins
Target Pins are a patented insulation fastener with an aerodynamic, embossed washer and a recessed nail head, to improve the quilting contour of the secured duct. Available in 1/2″, 3/4″, 1″, 1-1/8″, 1-1/2″ and 2″ lengths. Available in bulk size plastic pails.
Pin: .130″ Diameter 
Washer: Diameter 1.0″
Thickness: .015″ – .017″
BDEP Aerodynamic Washer Target Pins are used with FG, RH, PBF and MF Pinspotters.
| Item Number | Code | Description | Pin Length Before Weld | Pin Length After Weld |
Quantity |
| 26220 | BDEP-12 | 1/2″ Target Pin | .49 | .365 | 5 M |
| 26221 | BDEP-34 | 3/4″ Target Pin | .656 | .531 | 5 M |
| 26222 | BDEP-100 | 1″ Target Pin | .906 | .781 | 5 M |
| 26217 | BDEP-118 | 1-1/8″ Target Pin | 1.125 | 1.000 | 3 M |
| 26218 | BDEP-150 | 1-1/2″ Target Pin | 1.490 | 1.365 | 3 M |
| 26219 | BDEP-200 | 2″ Target Pin | 1.906 | 1.781 | 3 M |
BDEP Target Pin Literature Sheet
PN Spotter Pins
The spotter pin is welded to the sheet metal and the insulation is impaled over the nail. It is held in place with the addition of a galvanized steel washers. PC (metal) washers are used with PN’s. Pins can be installed with all LF, MF and PBF Pinspotters. Available in 3/4″, 1-1/4″, 2″ and 2-1/2″ lengths.
These are available in thousand pack (PNT) and bulk boxes (PNB). 
Pin Diameter: 14 Gauge galvanized
| Item Number | Code | Description | Approx. Pin Length |
For Insulation Thickness |
Quantity |
| 26001 | PNT-34 | 3/4″ Spotter Pin | .75 | 1/2″ | 1 M |
| 26002 | PNT-114 | 1-1/4″ Spotter Pin | 1.25 | 1″ | 1 M |
| 26003 | PNT-200 | 2″ Spotter Pin | 2.0 | 1-1/2″-2″ | 1 M |
| 26004 | PNT-250 | 2-1/2″ Spotter Pin | 2.5 | 2″-3″ | 1 M |
| 26005 | PNB-34 | 3/4″ Spotter Pin | .75 | 1/2″ | 10 M |
| 26006 | PNB-114 | 1-1/4″ Spotter Pin | 1.25 | 1″ | 10 M |
| 26007 | PNB-200 | 2″ Spotter Pin | 2.0 | 1-1/2″-2″ | 5 M |
| 26008 | PNB-250 | 2-1/2″ Spotter Pin | 2.5 | 2″-3″ | 5 M |
PC Spotter Clips (Washers)
PC Spotter clips are for use with PN Spotter Pins and are made of 30 gauge galvanized steel. They are available in thousand pack (PCT) and bulk pack boxes (PCB).
| Item Number | Code | Description | Area |
For use with | Quantity |
| 26017 | PCT-1 | Spotter Clip | 1.4375 Sq. Inch. | PN Spotter Pins | 1 M |
| 26019 | PCB-1 | Spotter Clip | 1.4375 Sq. Inch. | PN Spotter Pins | 10 M |