DURO DYNE ACCESS DOOR HANDLES & CLOSURE

SP-5 Door Handle

  • Strong zinc/aluminum alloy die-cast parts.
  • Corrosion-resistant, rustproof.
  • 5/16" diameter shaft with recessed grid to hold set-screws.
  • Finger grip on striker permits opening from inside.
  • Neoprene washer prevents leakage.
  • Easily installed - drill 5/16" hole through door.
  • Maximum accommodation (Door and Frame): 1-3/8" with spacer; 1-3/4" without spacer.
  • Recommended for use on doors 14" x 14" and smaller.

 

Item No. Code Description Qty per Box
8105 SP-5 5/16” Diameter Latch Assembly 25

SP-10 Door Handle

  • Strong zinc/aluminum alloy die-cast parts.
  • Corrosion-resistant, rustproof.
  • 3/8" diameter shaft with recessed grid to securely hold set-screws.
  • Finger grip on striker permits opening from inside.
  • Steel and neoprene washers both sides for airtight performance.
  • Easily installed - Drill 3/8" hole through door.
  • Maximum accommodation (Door and Frame): 1-5/8" with spacer; 2" without spacer.
  • Recommended for use on doors 24" x 24" and smaller.

 

Item No. Code Description Qty per Box
8106 SP-10 3/8” Diameter Latch Assembly 10

SP-20 Door Handle

  • Heavy zinc/aluminum alloy die-cast parts.
  • Smooth finish, corrosion resistant and rustproof.
  • 1/2" diameter shaft with recessed grid to secure set-screws.
  • Full inside handle for safety and convenience.
  • Steel and neoprene washers both sides for airtight performance.
  • Easily installed - Drill 1/2" hole through door.
  • Maximum accommodation (Door and Frame): 1-3/4" with spacer; 2-1/4" without spacer.
  • Recommended for use on doors larger than 24" x 24".(On very large doors, two handles spaced 1/3 of distance from top and bottom may be preferable.)

 

Item No. Code Description Qty per Box
8107 SP-20 1/2” Diameter Latch Assembly 10

SP-21 Door Handle

  • Heavy zinc/aluminum alloy die-cast parts.
  • Smooth finish, corrosion resistant and rustproof.
  • 1/2" diameter shaft with recessed grid to hold set-screws.
  • Full inside handle for safety and convenience.
  • Domed steel and neoprene washers outside to minimize leakage.
  • "Stop" plate, secured by single screw or rivet, allows handle to move to"Open" and "Shut" positions, but prevents inner handle break-off due to slammed doors.
  • Easily installed - Drill 1/2" hole through door.
  • Maximum accommodation (Door and Frame): 1-3/4" with spacer; 2-1/4" without spacer.
  • For use on large doors.

 

Item No. Code Description Qty per Box
8309 SP-21 1/2” Diameter Latch Assembly 10

SL-1 Sash Lock

  • Economical - for use on smaller doors and panels..
  • Heavy-gauge stamped steel parts.
  • "Oversized" rivet assembly for dependable service.
  • Zinc Chromate plating for corrosion resistance.
  • Convenient large-size handle.

Item No. Code Description Qty per Box
8108 SL-1 Sash Lock 50

 

 

 

Camlock

Item No. Code Description Qty per Box
8138 SL-2 Camlock 100